$14.95
Detailed instructions 2oz Sanding Resin Repair Filler Sand Paper (80/120/220) 2 stir sticks Sanding block...
$47.95
NEW! Low-VOC Clear "dual-cure" Polyester Resin Cures by either UV-light or by the addition of MEKP catalyst, or both. Clear, UV-stable, and can cure a bone-dry surface if you allow it. But here is also what you can do:
Using Solarez® offers exceptional advantages over conventional curing resins; comparable in cost, faster production, and safer for the environment! Wahoo International (makers of Solarez) promoted UV-cure since 1986 and it was a tough nut to crack at the time - We were the first company to offer a UV-cure resin - and a lot of disbelief! Now, most of the world's top surfboard manufacturers have come to realize that UV curing is the future of surfboard materials technology. Solarez® UV Resin offers not only better performance and quality but also massive increases in productivity and cost savings. NEW, low odor, (low VOC) polyester resin will certainly be welcomed by garage laminators (and the neighbors). This resin has much less smell than regular polyester. There is no compromise in any of the physical characteristics.
$16.95
Same tried & proven formula for over 20 years has saved many a surfboard from the perils of water induction in countries all over the Globe. Simple to use: sand-prep (60 grit) the surface around the ding, squeeze out enough Solarez to fill the ding, cover the wet resin with a piece of plastic baggie, smooth it out, and EXPOSE TO SUNLIGHT FOR A MINUTE OR TWO. Now, peel off the baggie and do some minor touch-up sanding with the 240 grit side and GO SURF!
This is a LOW EXOTHERM formula that will not melt delicate EPS like other products. They don't melt at first, but while curing, the exotherm so much, they melt the foam and actually create a more cavernous ding than you had!
Solarez has glass and ceramic fibers in it which provides better adhesion, and impact resistance. That, coupled with a flexible resin gives Solarez Epoxy Ding Repair a tough, resilient finish. - IN LESS THAN THREE MINUTES
$7.95
SOLAREZ Epoxy repair putty is a mixture of clear, high strength, fiber reinforced epoxy resin and an amazing solar activated catalyst. There is no mixing required. Just use it right from the tube. It gels in 5 seconds, curing in 3 minutes - but ONLY when exposed to sunlight.
$5.95
– Sold OutThe Puka Patch instantly seals dings on surfboards, SUP's, kayaks, and other personal watercraft! Sticks to wet surfaces, and surf wax... New ding? No worries! Just slap one on and keep charging!
$9.95
The Puka Patch XL for bigger dings. Instantly seals dings on surfboards, SUP’s, kayaks and other personal watercraft. So Amazing! Sticks to wet surfaces, and surf wax. Just slap one on and keep charging!
$8.00
Q-Cell is a lightweight alternative to just filling that big hole in your board with heavy resin!
$27.95
Detailed instructions 8oz Sanding Resin Repair Filler 4 stir sticks 4 mixing cups Sand Paper...
$28.95
– Sold OutDetailed instructions 4oz Clear Epoxy Resin 2oz Epoxy Hardener Sand Paper (80/120/220) Sanding block 2...
$23.95
Detailed instructions 4oz Sanding Resin Repair Filler 3 stir sticks Sand Paper (80/120/220) Sanding block...
$13.95
– Sold OutTOUGH, CLEAR, ULTRA-FLEXIBLE, WATERPROOF
Styrofoam & EPS-Core constructed soft surfboards, bodyboards and SUPs have become quite popular these days but provide a real challenge to repair. SPONGE-REZ is awesome for repair on the outer skin and hull, but can melt the inner core, If EPS is visible, use the Solarez UV cure epoxy to make a protective coating over the EPS, cure it in the sun for 45 seconds, now apply SPONGE-REZ on top. Internal repairs such as delaminations or deep dings can then be repaired.
$14.95
SOLAREZ repair putty is a mixture of clear, non-yellowing, high-strength, fiber-reinforced polyester resin and an amazing solar-activated catalyst. There is no mixing required, just use it right from the tube. It gels in 30 seconds, curing in 3 minutes - but ONLY when exposed to sunlight. The proprietary formula assures that millions of fiberglass fibers are thoroughly wet-out and evenly dispersed in every dose.
$14.95
Lightweight, strong, sand-able Filler formulated especially for surfboard [urethane] foam repair. For deep dings. Lightweight and easy to sand. Cures either by UV light in approx. 3 minutes or by MEKP catalyst in 30 minutes. Comes with 60/240 grit sand pad and spreader card. Not for use on Styrofoam (EPS).
$13.95
What is Solarez Microlite Epoxy? It is a white putty made of high-strength UV-Cure resin and super lightweight additives that effectively repair ALL TYPES OF SURFBOARD FOAM, including Styrofoam. This putty cures in roughly 3 minutes by exposure to sunlight or artificial UV light. It sands and fairs very nicely, making it an easy one-step repair for almost any ding. UV-CURE
$6.95
In a crush-proof watertight plastic capsule.
$37.95
Everything you need for a professional repair in a handy crush-proof travel case!
$32.95
– Sold OutDetailed Instructions 8oz Sanding Resin 1ft 4oz Fiberglass cloth Fin Rope 5 stirring sticks 5...
